AKW Sulby 1000x1000mm 90mm High Shower Tray

Sulby Tray:

• Patented above floor gravity waste with 8 possible outlet points
• 90mm high
• Non handed - fits left or right
• Tiling upstand supplied with all shower trays
• No under tray foaming required
• Adjustable water trap of 31mm or 38mm
• Low entry step in tray for a defined showering area
• Many flexible features make for simple fitting
• Excellent drainage (35mm fall inside tray)
• Choice of corner, side and end ramps for easy access
• No messy pipework, improving the looks
• Constructed of hand laid fibre glass, double thickness encapsulated sterling board and steel reinforcing sections
• Integral gravity waste that does not penetrate the floor
• 30 stone load bearing on tray
• Easy removable cover to access trap
• Tray hollow underneath to give area to hide (re-direct) existing pipe work runs
• Can be used on timber and concrete floors
• ABS waste accepts 43mm pipe to BS EN 1455-1
• Please note:  The Sulby waste is limited to 7 litres per minute, please check shower performance for compatibility
• *Guaranteed for life

Gravity Waste:

• Good seals and location
• Built in filter
• 124mm deep below mounting surface
• 50mm water trap depth (seal)
• 50mm threaded waste fitting
• Please note:  The Sulby waste is limited to 7 litres per minute, please check shower performance for compatibility